New
This commit is contained in:
刘正航
@@ -0,0 +1,140 @@
|
||||
|
||||
|
||||
;; NOTE: To allow the use of this file for both ARMv6M and ARMv7M,
|
||||
;; we will only use 16-bit Thumb intructions.
|
||||
|
||||
.extern _lc_ub_stack ; usr/sys mode stack pointer
|
||||
.extern _lc_ue_stack ; symbol required by debugger
|
||||
.extern _lc_ub_table ; ROM to RAM copy table
|
||||
.extern main
|
||||
.extern _Exit
|
||||
.extern exit
|
||||
.weak exit
|
||||
.global __get_argcv
|
||||
.weak __get_argcv
|
||||
.extern __argcvbuf
|
||||
.weak __argcvbuf
|
||||
;;.extern __init_hardware
|
||||
.extern SystemInit
|
||||
|
||||
.if @defined('__PROF_ENABLE__')
|
||||
.extern __prof_init
|
||||
.endif
|
||||
.if @defined('__POSIX__')
|
||||
.extern posix_main
|
||||
.extern _posix_boot_stack_top
|
||||
.endif
|
||||
|
||||
.global _START
|
||||
|
||||
.section .text.cstart
|
||||
|
||||
.thumb
|
||||
_START:
|
||||
;; anticipate possible ROM/RAM remapping
|
||||
;; by loading the 'real' program address
|
||||
ldr r1,=_Next
|
||||
bx r1
|
||||
_Next:
|
||||
;; initialize the stack pointer
|
||||
ldr r1,=_lc_ub_stack ; TODO: make this part of the vector table
|
||||
mov sp,r1
|
||||
|
||||
;; call a user function which initializes function.
|
||||
bl SystemInit
|
||||
|
||||
;; copy initialized sections from ROM to RAM
|
||||
;; and clear uninitialized data sections in RAM
|
||||
|
||||
ldr r3,=_lc_ub_table
|
||||
movs r0,#0
|
||||
cploop:
|
||||
ldr r4,[r3,#0] ; load type
|
||||
ldr r5,[r3,#4] ; dst address
|
||||
ldr r6,[r3,#8] ; src address
|
||||
ldr r7,[r3,#12] ; size
|
||||
|
||||
cmp r4,#1
|
||||
beq copy
|
||||
cmp r4,#2
|
||||
beq clear
|
||||
b done
|
||||
|
||||
copy:
|
||||
subs r7,r7,#1
|
||||
ldrb r1,[r6,r7]
|
||||
strb r1,[r5,r7]
|
||||
bne copy
|
||||
|
||||
adds r3,r3,#16
|
||||
b cploop
|
||||
|
||||
clear:
|
||||
subs r7,r7,#1
|
||||
strb r0,[r5,r7]
|
||||
bne clear
|
||||
|
||||
adds r3,r3,#16
|
||||
b cploop
|
||||
|
||||
done:
|
||||
|
||||
.if @defined('__POSIX__')
|
||||
|
||||
;; posix stack buffer for system upbringing
|
||||
ldr r0,=_posix_boot_stack_top
|
||||
ldr r0, [r0]
|
||||
mov sp,r0
|
||||
|
||||
.else
|
||||
|
||||
;; load r10 with end of USR/SYS stack, which is
|
||||
;; needed in case stack overflow checking is on
|
||||
;; NOTE: use 16-bit instructions only, for ARMv6M
|
||||
ldr r0,=_lc_ue_stack
|
||||
mov r10,r0
|
||||
|
||||
.endif
|
||||
|
||||
.if @defined('__PROF_ENABLE__')
|
||||
bl __prof_init
|
||||
.endif
|
||||
|
||||
.if @defined('__POSIX__')
|
||||
;; call posix_main with no arguments
|
||||
bl posix_main
|
||||
.else
|
||||
;; retrieve argc and argv (default argv[0]==NULL & argc==0)
|
||||
bl __get_argcv
|
||||
ldr r1,=__argcvbuf
|
||||
;; call main
|
||||
bl main
|
||||
.endif
|
||||
|
||||
;; call exit using the return value from main()
|
||||
;; Note. Calling exit will also run all functions
|
||||
;; that were supplied through atexit().
|
||||
bl exit
|
||||
|
||||
__get_argcv: ; weak definition
|
||||
movs r0,#0
|
||||
bx lr
|
||||
|
||||
.ltorg
|
||||
.endsec
|
||||
|
||||
.calls '_START', ' '
|
||||
.calls '_START','__init_vector_table'
|
||||
.if @defined('__PROF_ENABLE__')
|
||||
.calls '_START','__prof_init'
|
||||
.endif
|
||||
.if @defined('__POSIX__')
|
||||
.calls '_START','posix_main'
|
||||
.else
|
||||
.calls '_START','__get_argcv'
|
||||
.calls '_START','main'
|
||||
.endif
|
||||
.calls '_START','exit'
|
||||
.calls '_START','',0
|
||||
|
||||
.end
|
||||
@@ -0,0 +1,424 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file startup_stm32l1xx_hd.s
|
||||
* @author MCD Application Team
|
||||
* @version V1.1.1
|
||||
* @date 09-March-2012
|
||||
* @brief STM32L1xx Ultra Low Power High-density Devices vector table for
|
||||
* Atollic toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Configure the clock system
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
|
||||
.equ BootRAM, 0xF108F85F
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
movs r1, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r3, =_sidata
|
||||
ldr r3, [r3, r1]
|
||||
str r3, [r0, r1]
|
||||
adds r1, r1, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
ldr r0, =_sdata
|
||||
ldr r3, =_edata
|
||||
adds r2, r0, r1
|
||||
cmp r2, r3
|
||||
bcc CopyDataInit
|
||||
ldr r2, =_sbss
|
||||
b LoopFillZerobss
|
||||
/* Zero fill the bss segment. */
|
||||
FillZerobss:
|
||||
movs r3, #0
|
||||
str r3, [r2], #4
|
||||
|
||||
LoopFillZerobss:
|
||||
ldr r3, = _ebss
|
||||
cmp r2, r3
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call the clock system intitialization function.*/
|
||||
bl SystemInit
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
*
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_STAMP_IRQHandler
|
||||
.word RTC_WKUP_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_IRQHandler
|
||||
.word USB_HP_IRQHandler
|
||||
.word USB_LP_IRQHandler
|
||||
.word DAC_IRQHandler
|
||||
.word COMP_IRQHandler
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word LCD_IRQHandler
|
||||
.word TIM9_IRQHandler
|
||||
.word TIM10_IRQHandler
|
||||
.word TIM11_IRQHandler
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word TIM4_IRQHandler
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word I2C2_EV_IRQHandler
|
||||
.word I2C2_ER_IRQHandler
|
||||
.word SPI1_IRQHandler
|
||||
.word SPI2_IRQHandler
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word USART3_IRQHandler
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word USB_FS_WKUP_IRQHandler
|
||||
.word TIM6_IRQHandler
|
||||
.word TIM7_IRQHandler
|
||||
.word SDIO_IRQHandler
|
||||
.word TIM5_IRQHandler
|
||||
.word SPI3_IRQHandler
|
||||
.word UART4_IRQHandler
|
||||
.word UART5_IRQHandler
|
||||
.word DMA2_Channel1_IRQHandler
|
||||
.word DMA2_Channel2_IRQHandler
|
||||
.word DMA2_Channel3_IRQHandler
|
||||
.word DMA2_Channel4_IRQHandler
|
||||
.word DMA2_Channel5_IRQHandler
|
||||
.word AES_IRQHandler
|
||||
.word COMP_ACQ_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word BootRAM /* @0x108. This is for boot in RAM mode for
|
||||
STM32L15x ULtra Low Power High-density devices. */
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_STAMP_IRQHandler
|
||||
.thumb_set TAMPER_STAMP_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_WKUP_IRQHandler
|
||||
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_IRQHandler
|
||||
.thumb_set ADC1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_HP_IRQHandler
|
||||
.thumb_set USB_HP_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_LP_IRQHandler
|
||||
.thumb_set USB_LP_IRQHandler,Default_Handler
|
||||
|
||||
.weak DAC_IRQHandler
|
||||
.thumb_set DAC_IRQHandler,Default_Handler
|
||||
|
||||
.weak COMP_IRQHandler
|
||||
.thumb_set COMP_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak LCD_IRQHandler
|
||||
.thumb_set LCD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM9_IRQHandler
|
||||
.thumb_set TIM9_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM10_IRQHandler
|
||||
.thumb_set TIM10_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM11_IRQHandler
|
||||
.thumb_set TIM11_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_FS_WKUP_IRQHandler
|
||||
.thumb_set USB_FS_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM6_IRQHandler
|
||||
.thumb_set TIM6_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM7_IRQHandler
|
||||
.thumb_set TIM7_IRQHandler,Default_Handler
|
||||
|
||||
.weak SDIO_IRQHandler
|
||||
.thumb_set SDIO_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM5_IRQHandler
|
||||
.thumb_set TIM5_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI3_IRQHandler
|
||||
.thumb_set SPI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART4_IRQHandler
|
||||
.thumb_set UART4_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART5_IRQHandler
|
||||
.thumb_set UART5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel1_IRQHandler
|
||||
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel2_IRQHandler
|
||||
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel3_IRQHandler
|
||||
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel4_IRQHandler
|
||||
.thumb_set DMA2_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel5_IRQHandler
|
||||
.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak AES_IRQHandler
|
||||
.thumb_set AES_IRQHandler,Default_Handler
|
||||
|
||||
.weak COMP_ACQ_IRQHandler
|
||||
.thumb_set COMP_ACQ_IRQHandler,Default_Handler
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
||||
@@ -0,0 +1,376 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file startup_stm32l1xx_md.s
|
||||
* @author MCD Application Team
|
||||
* @version V1.1.1
|
||||
* @date 09-March-2012
|
||||
* @brief STM32L1xx Ultra Low Power Medium-density Devices vector table for
|
||||
* Atollic toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Configure the clock system
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
|
||||
.equ BootRAM, 0xF108F85F
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
movs r1, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r3, =_sidata
|
||||
ldr r3, [r3, r1]
|
||||
str r3, [r0, r1]
|
||||
adds r1, r1, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
ldr r0, =_sdata
|
||||
ldr r3, =_edata
|
||||
adds r2, r0, r1
|
||||
cmp r2, r3
|
||||
bcc CopyDataInit
|
||||
ldr r2, =_sbss
|
||||
b LoopFillZerobss
|
||||
/* Zero fill the bss segment. */
|
||||
FillZerobss:
|
||||
movs r3, #0
|
||||
str r3, [r2], #4
|
||||
|
||||
LoopFillZerobss:
|
||||
ldr r3, = _ebss
|
||||
cmp r2, r3
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call the clock system intitialization function.*/
|
||||
bl SystemInit
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
*
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_STAMP_IRQHandler
|
||||
.word RTC_WKUP_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_IRQHandler
|
||||
.word USB_HP_IRQHandler
|
||||
.word USB_LP_IRQHandler
|
||||
.word DAC_IRQHandler
|
||||
.word COMP_IRQHandler
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word LCD_IRQHandler
|
||||
.word TIM9_IRQHandler
|
||||
.word TIM10_IRQHandler
|
||||
.word TIM11_IRQHandler
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word TIM4_IRQHandler
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word I2C2_EV_IRQHandler
|
||||
.word I2C2_ER_IRQHandler
|
||||
.word SPI1_IRQHandler
|
||||
.word SPI2_IRQHandler
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word USART3_IRQHandler
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word USB_FS_WKUP_IRQHandler
|
||||
.word TIM6_IRQHandler
|
||||
.word TIM7_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word BootRAM /* @0x108. This is for boot in RAM mode for
|
||||
STM32L15x ULtra Low Power Medium-density devices. */
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_STAMP_IRQHandler
|
||||
.thumb_set TAMPER_STAMP_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_WKUP_IRQHandler
|
||||
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_IRQHandler
|
||||
.thumb_set ADC1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_HP_IRQHandler
|
||||
.thumb_set USB_HP_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_LP_IRQHandler
|
||||
.thumb_set USB_LP_IRQHandler,Default_Handler
|
||||
|
||||
.weak DAC_IRQHandler
|
||||
.thumb_set DAC_IRQHandler,Default_Handler
|
||||
|
||||
.weak COMP_IRQHandler
|
||||
.thumb_set COMP_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak LCD_IRQHandler
|
||||
.thumb_set LCD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM9_IRQHandler
|
||||
.thumb_set TIM9_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM10_IRQHandler
|
||||
.thumb_set TIM10_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM11_IRQHandler
|
||||
.thumb_set TIM11_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_FS_WKUP_IRQHandler
|
||||
.thumb_set USB_FS_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM6_IRQHandler
|
||||
.thumb_set TIM6_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM7_IRQHandler
|
||||
.thumb_set TIM7_IRQHandler,Default_Handler
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
||||
@@ -0,0 +1,415 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file startup_stm32l1xx_mdp.s
|
||||
* @author MCD Application Team
|
||||
* @version V1.1.1
|
||||
* @date 09-March-2012
|
||||
* @brief STM32L1xx Ultra Low Power Medium-density Plus Devices vector table
|
||||
* for Atollic toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Configure the clock system
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
|
||||
.equ BootRAM, 0xF108F85F
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
movs r1, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r3, =_sidata
|
||||
ldr r3, [r3, r1]
|
||||
str r3, [r0, r1]
|
||||
adds r1, r1, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
ldr r0, =_sdata
|
||||
ldr r3, =_edata
|
||||
adds r2, r0, r1
|
||||
cmp r2, r3
|
||||
bcc CopyDataInit
|
||||
ldr r2, =_sbss
|
||||
b LoopFillZerobss
|
||||
/* Zero fill the bss segment. */
|
||||
FillZerobss:
|
||||
movs r3, #0
|
||||
str r3, [r2], #4
|
||||
|
||||
LoopFillZerobss:
|
||||
ldr r3, = _ebss
|
||||
cmp r2, r3
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call the clock system intitialization function.*/
|
||||
bl SystemInit
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
*
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_STAMP_IRQHandler
|
||||
.word RTC_WKUP_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_IRQHandler
|
||||
.word USB_HP_IRQHandler
|
||||
.word USB_LP_IRQHandler
|
||||
.word DAC_IRQHandler
|
||||
.word COMP_IRQHandler
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word LCD_IRQHandler
|
||||
.word TIM9_IRQHandler
|
||||
.word TIM10_IRQHandler
|
||||
.word TIM11_IRQHandler
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word TIM4_IRQHandler
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word I2C2_EV_IRQHandler
|
||||
.word I2C2_ER_IRQHandler
|
||||
.word SPI1_IRQHandler
|
||||
.word SPI2_IRQHandler
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word USART3_IRQHandler
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word USB_FS_WKUP_IRQHandler
|
||||
.word TIM6_IRQHandler
|
||||
.word TIM7_IRQHandler
|
||||
.word 0
|
||||
.word TIM5_IRQHandler
|
||||
.word SPI3_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word DMA2_Channel1_IRQHandler
|
||||
.word DMA2_Channel2_IRQHandler
|
||||
.word DMA2_Channel3_IRQHandler
|
||||
.word DMA2_Channel4_IRQHandler
|
||||
.word DMA2_Channel5_IRQHandler
|
||||
.word AES_IRQHandler
|
||||
.word COMP_ACQ_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word BootRAM /* @0x108. This is for boot in RAM mode for
|
||||
STM32L15x ULtra Low Power Medium-density devices. */
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_STAMP_IRQHandler
|
||||
.thumb_set TAMPER_STAMP_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_WKUP_IRQHandler
|
||||
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_IRQHandler
|
||||
.thumb_set ADC1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_HP_IRQHandler
|
||||
.thumb_set USB_HP_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_LP_IRQHandler
|
||||
.thumb_set USB_LP_IRQHandler,Default_Handler
|
||||
|
||||
.weak DAC_IRQHandler
|
||||
.thumb_set DAC_IRQHandler,Default_Handler
|
||||
|
||||
.weak COMP_IRQHandler
|
||||
.thumb_set COMP_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak LCD_IRQHandler
|
||||
.thumb_set LCD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM9_IRQHandler
|
||||
.thumb_set TIM9_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM10_IRQHandler
|
||||
.thumb_set TIM10_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM11_IRQHandler
|
||||
.thumb_set TIM11_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_FS_WKUP_IRQHandler
|
||||
.thumb_set USB_FS_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM6_IRQHandler
|
||||
.thumb_set TIM6_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM7_IRQHandler
|
||||
.thumb_set TIM7_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM5_IRQHandler
|
||||
.thumb_set TIM5_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI3_IRQHandler
|
||||
.thumb_set SPI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel1_IRQHandler
|
||||
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel2_IRQHandler
|
||||
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel3_IRQHandler
|
||||
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel4_IRQHandler
|
||||
.thumb_set DMA2_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel5_IRQHandler
|
||||
.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak AES_IRQHandler
|
||||
.thumb_set AES_IRQHandler,Default_Handler
|
||||
|
||||
.weak COMP_ACQ_IRQHandler
|
||||
.thumb_set COMP_ACQ_IRQHandler,Default_Handler
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
||||
@@ -0,0 +1,356 @@
|
||||
;******************** (C) COPYRIGHT 2012 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32l1xx_hd.s
|
||||
;* Author : MCD Application Team
|
||||
;* Version : V1.1.1
|
||||
;* Date : 09-March-2012
|
||||
;* Description : STM32L1xx Ultra Low Power High-density Devices vector
|
||||
;* table for MDK-ARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the CortexM3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;* <<< Use Configuration Wizard in Context Menu >>>
|
||||
;*******************************************************************************
|
||||
;
|
||||
; Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
; You may not use this file except in compliance with the License.
|
||||
; You may obtain a copy of the License at:
|
||||
;
|
||||
; http://www.st.com/software_license_agreement_liberty_v2
|
||||
;
|
||||
; Unless required by applicable law or agreed to in writing, software
|
||||
; distributed under the License is distributed on an "AS IS" BASIS,
|
||||
; WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
; See the License for the specific language governing permissions and
|
||||
; limitations under the License.
|
||||
;
|
||||
;*******************************************************************************
|
||||
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x00000400
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp
|
||||
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x00000200
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_STAMP_IRQHandler ; Tamper and Time Stamp
|
||||
DCD RTC_WKUP_IRQHandler ; RTC Wakeup
|
||||
DCD FLASH_IRQHandler ; FLASH
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_IRQHandler ; ADC1
|
||||
DCD USB_HP_IRQHandler ; USB High Priority
|
||||
DCD USB_LP_IRQHandler ; USB Low Priority
|
||||
DCD DAC_IRQHandler ; DAC
|
||||
DCD COMP_IRQHandler ; COMP through EXTI Line
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD LCD_IRQHandler ; LCD
|
||||
DCD TIM9_IRQHandler ; TIM9
|
||||
DCD TIM10_IRQHandler ; TIM10
|
||||
DCD TIM11_IRQHandler ; TIM11
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
DCD USB_FS_WKUP_IRQHandler ; USB FS Wakeup from suspend
|
||||
DCD TIM6_IRQHandler ; TIM6
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD SDIO_IRQHandler ; SDIO
|
||||
DCD TIM5_IRQHandler ; TIM5
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD UART4_IRQHandler ; UART4
|
||||
DCD UART5_IRQHandler ; UART5
|
||||
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1
|
||||
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2
|
||||
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3
|
||||
DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4
|
||||
DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5
|
||||
DCD AES_IRQHandler ; AES
|
||||
DCD COMP_ACQ_IRQHandler ; Comparator Channel Acquisition
|
||||
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler routine
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT __main
|
||||
IMPORT SystemInit
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_IRQHandler [WEAK]
|
||||
EXPORT TAMPER_STAMP_IRQHandler [WEAK]
|
||||
EXPORT RTC_WKUP_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel6_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel7_IRQHandler [WEAK]
|
||||
EXPORT ADC1_IRQHandler [WEAK]
|
||||
EXPORT USB_HP_IRQHandler [WEAK]
|
||||
EXPORT USB_LP_IRQHandler [WEAK]
|
||||
EXPORT DAC_IRQHandler [WEAK]
|
||||
EXPORT COMP_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT LCD_IRQHandler [WEAK]
|
||||
EXPORT TIM9_IRQHandler [WEAK]
|
||||
EXPORT TIM10_IRQHandler [WEAK]
|
||||
EXPORT TIM11_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT TIM3_IRQHandler [WEAK]
|
||||
EXPORT TIM4_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT I2C2_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C2_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT SPI2_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT USART3_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTC_Alarm_IRQHandler [WEAK]
|
||||
EXPORT USB_FS_WKUP_IRQHandler [WEAK]
|
||||
EXPORT TIM6_IRQHandler [WEAK]
|
||||
EXPORT TIM7_IRQHandler [WEAK]
|
||||
EXPORT SDIO_IRQHandler [WEAK]
|
||||
EXPORT TIM5_IRQHandler [WEAK]
|
||||
EXPORT SPI3_IRQHandler [WEAK]
|
||||
EXPORT UART4_IRQHandler [WEAK]
|
||||
EXPORT UART5_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel5_IRQHandler [WEAK]
|
||||
EXPORT AES_IRQHandler [WEAK]
|
||||
EXPORT COMP_ACQ_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_IRQHandler
|
||||
TAMPER_STAMP_IRQHandler
|
||||
RTC_WKUP_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Channel1_IRQHandler
|
||||
DMA1_Channel2_IRQHandler
|
||||
DMA1_Channel3_IRQHandler
|
||||
DMA1_Channel4_IRQHandler
|
||||
DMA1_Channel5_IRQHandler
|
||||
DMA1_Channel6_IRQHandler
|
||||
DMA1_Channel7_IRQHandler
|
||||
ADC1_IRQHandler
|
||||
USB_HP_IRQHandler
|
||||
USB_LP_IRQHandler
|
||||
DAC_IRQHandler
|
||||
COMP_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
LCD_IRQHandler
|
||||
TIM9_IRQHandler
|
||||
TIM10_IRQHandler
|
||||
TIM11_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
TIM3_IRQHandler
|
||||
TIM4_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
I2C2_EV_IRQHandler
|
||||
I2C2_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
SPI2_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
USART3_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTC_Alarm_IRQHandler
|
||||
USB_FS_WKUP_IRQHandler
|
||||
TIM6_IRQHandler
|
||||
TIM7_IRQHandler
|
||||
SDIO_IRQHandler
|
||||
TIM5_IRQHandler
|
||||
SPI3_IRQHandler
|
||||
UART4_IRQHandler
|
||||
UART5_IRQHandler
|
||||
DMA2_Channel1_IRQHandler
|
||||
DMA2_Channel2_IRQHandler
|
||||
DMA2_Channel3_IRQHandler
|
||||
DMA2_Channel4_IRQHandler
|
||||
DMA2_Channel5_IRQHandler
|
||||
AES_IRQHandler
|
||||
COMP_ACQ_IRQHandler
|
||||
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
END
|
||||
|
||||
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
||||
@@ -0,0 +1,319 @@
|
||||
;******************** (C) COPYRIGHT 2012 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32l1xx_md.s
|
||||
;* Author : MCD Application Team
|
||||
;* Version : V1.1.1
|
||||
;* Date : 09-March-2012
|
||||
;* Description : STM32L1xx Ultra Low Power Medium-density Devices vector
|
||||
;* table for MDK-ARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the CortexM3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;* <<< Use Configuration Wizard in Context Menu >>>
|
||||
;*******************************************************************************
|
||||
;
|
||||
; Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
; You may not use this file except in compliance with the License.
|
||||
; You may obtain a copy of the License at:
|
||||
;
|
||||
; http://www.st.com/software_license_agreement_liberty_v2
|
||||
;
|
||||
; Unless required by applicable law or agreed to in writing, software
|
||||
; distributed under the License is distributed on an "AS IS" BASIS,
|
||||
; WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
; See the License for the specific language governing permissions and
|
||||
; limitations under the License.
|
||||
;
|
||||
;*******************************************************************************
|
||||
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x00000400
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp
|
||||
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x00000200
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_STAMP_IRQHandler ; Tamper and Time Stamp
|
||||
DCD RTC_WKUP_IRQHandler ; RTC Wakeup
|
||||
DCD FLASH_IRQHandler ; FLASH
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_IRQHandler ; ADC1
|
||||
DCD USB_HP_IRQHandler ; USB High Priority
|
||||
DCD USB_LP_IRQHandler ; USB Low Priority
|
||||
DCD DAC_IRQHandler ; DAC
|
||||
DCD COMP_IRQHandler ; COMP through EXTI Line
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD LCD_IRQHandler ; LCD
|
||||
DCD TIM9_IRQHandler ; TIM9
|
||||
DCD TIM10_IRQHandler ; TIM10
|
||||
DCD TIM11_IRQHandler ; TIM11
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
DCD USB_FS_WKUP_IRQHandler ; USB FS Wakeup from suspend
|
||||
DCD TIM6_IRQHandler ; TIM6
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler routine
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT __main
|
||||
IMPORT SystemInit
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_IRQHandler [WEAK]
|
||||
EXPORT TAMPER_STAMP_IRQHandler [WEAK]
|
||||
EXPORT RTC_WKUP_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel6_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel7_IRQHandler [WEAK]
|
||||
EXPORT ADC1_IRQHandler [WEAK]
|
||||
EXPORT USB_HP_IRQHandler [WEAK]
|
||||
EXPORT USB_LP_IRQHandler [WEAK]
|
||||
EXPORT DAC_IRQHandler [WEAK]
|
||||
EXPORT COMP_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT LCD_IRQHandler [WEAK]
|
||||
EXPORT TIM9_IRQHandler [WEAK]
|
||||
EXPORT TIM10_IRQHandler [WEAK]
|
||||
EXPORT TIM11_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT TIM3_IRQHandler [WEAK]
|
||||
EXPORT TIM4_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT I2C2_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C2_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT SPI2_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT USART3_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTC_Alarm_IRQHandler [WEAK]
|
||||
EXPORT USB_FS_WKUP_IRQHandler [WEAK]
|
||||
EXPORT TIM6_IRQHandler [WEAK]
|
||||
EXPORT TIM7_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_IRQHandler
|
||||
TAMPER_STAMP_IRQHandler
|
||||
RTC_WKUP_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Channel1_IRQHandler
|
||||
DMA1_Channel2_IRQHandler
|
||||
DMA1_Channel3_IRQHandler
|
||||
DMA1_Channel4_IRQHandler
|
||||
DMA1_Channel5_IRQHandler
|
||||
DMA1_Channel6_IRQHandler
|
||||
DMA1_Channel7_IRQHandler
|
||||
ADC1_IRQHandler
|
||||
USB_HP_IRQHandler
|
||||
USB_LP_IRQHandler
|
||||
DAC_IRQHandler
|
||||
COMP_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
LCD_IRQHandler
|
||||
TIM9_IRQHandler
|
||||
TIM10_IRQHandler
|
||||
TIM11_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
TIM3_IRQHandler
|
||||
TIM4_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
I2C2_EV_IRQHandler
|
||||
I2C2_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
SPI2_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
USART3_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTC_Alarm_IRQHandler
|
||||
USB_FS_WKUP_IRQHandler
|
||||
TIM6_IRQHandler
|
||||
TIM7_IRQHandler
|
||||
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
END
|
||||
|
||||
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
||||
@@ -0,0 +1,350 @@
|
||||
;******************** (C) COPYRIGHT 2012 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32l1xx_mdp.s
|
||||
;* Author : MCD Application Team
|
||||
;* Version : V1.1.1
|
||||
;* Date : 09-March-2012
|
||||
;* Description : STM32L1xx Ultra Low Power Medium-density Plus Devices vector
|
||||
;* table for MDK-ARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the CortexM3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;* <<< Use Configuration Wizard in Context Menu >>>
|
||||
;*******************************************************************************
|
||||
;
|
||||
; Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
; You may not use this file except in compliance with the License.
|
||||
; You may obtain a copy of the License at:
|
||||
;
|
||||
; http://www.st.com/software_license_agreement_liberty_v2
|
||||
;
|
||||
; Unless required by applicable law or agreed to in writing, software
|
||||
; distributed under the License is distributed on an "AS IS" BASIS,
|
||||
; WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
; See the License for the specific language governing permissions and
|
||||
; limitations under the License.
|
||||
;
|
||||
;*******************************************************************************
|
||||
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x00000400
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp
|
||||
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x00000200
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_STAMP_IRQHandler ; Tamper and Time Stamp
|
||||
DCD RTC_WKUP_IRQHandler ; RTC Wakeup
|
||||
DCD FLASH_IRQHandler ; FLASH
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_IRQHandler ; ADC1
|
||||
DCD USB_HP_IRQHandler ; USB High Priority
|
||||
DCD USB_LP_IRQHandler ; USB Low Priority
|
||||
DCD DAC_IRQHandler ; DAC
|
||||
DCD COMP_IRQHandler ; COMP through EXTI Line
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD LCD_IRQHandler ; LCD
|
||||
DCD TIM9_IRQHandler ; TIM9
|
||||
DCD TIM10_IRQHandler ; TIM10
|
||||
DCD TIM11_IRQHandler ; TIM11
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
DCD USB_FS_WKUP_IRQHandler ; USB FS Wakeup from suspend
|
||||
DCD TIM6_IRQHandler ; TIM6
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM5_IRQHandler ; TIM5
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1
|
||||
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2
|
||||
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3
|
||||
DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4
|
||||
DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5
|
||||
DCD AES_IRQHandler ; AES
|
||||
DCD COMP_ACQ_IRQHandler ; Comparator Channel Acquisition
|
||||
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler routine
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT __main
|
||||
IMPORT SystemInit
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_IRQHandler [WEAK]
|
||||
EXPORT TAMPER_STAMP_IRQHandler [WEAK]
|
||||
EXPORT RTC_WKUP_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel6_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel7_IRQHandler [WEAK]
|
||||
EXPORT ADC1_IRQHandler [WEAK]
|
||||
EXPORT USB_HP_IRQHandler [WEAK]
|
||||
EXPORT USB_LP_IRQHandler [WEAK]
|
||||
EXPORT DAC_IRQHandler [WEAK]
|
||||
EXPORT COMP_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT LCD_IRQHandler [WEAK]
|
||||
EXPORT TIM9_IRQHandler [WEAK]
|
||||
EXPORT TIM10_IRQHandler [WEAK]
|
||||
EXPORT TIM11_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT TIM3_IRQHandler [WEAK]
|
||||
EXPORT TIM4_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT I2C2_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C2_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT SPI2_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT USART3_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTC_Alarm_IRQHandler [WEAK]
|
||||
EXPORT USB_FS_WKUP_IRQHandler [WEAK]
|
||||
EXPORT TIM6_IRQHandler [WEAK]
|
||||
EXPORT TIM7_IRQHandler [WEAK]
|
||||
EXPORT TIM5_IRQHandler [WEAK]
|
||||
EXPORT SPI3_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel5_IRQHandler [WEAK]
|
||||
EXPORT AES_IRQHandler [WEAK]
|
||||
EXPORT COMP_ACQ_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_IRQHandler
|
||||
TAMPER_STAMP_IRQHandler
|
||||
RTC_WKUP_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Channel1_IRQHandler
|
||||
DMA1_Channel2_IRQHandler
|
||||
DMA1_Channel3_IRQHandler
|
||||
DMA1_Channel4_IRQHandler
|
||||
DMA1_Channel5_IRQHandler
|
||||
DMA1_Channel6_IRQHandler
|
||||
DMA1_Channel7_IRQHandler
|
||||
ADC1_IRQHandler
|
||||
USB_HP_IRQHandler
|
||||
USB_LP_IRQHandler
|
||||
DAC_IRQHandler
|
||||
COMP_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
LCD_IRQHandler
|
||||
TIM9_IRQHandler
|
||||
TIM10_IRQHandler
|
||||
TIM11_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
TIM3_IRQHandler
|
||||
TIM4_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
I2C2_EV_IRQHandler
|
||||
I2C2_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
SPI2_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
USART3_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTC_Alarm_IRQHandler
|
||||
USB_FS_WKUP_IRQHandler
|
||||
TIM6_IRQHandler
|
||||
TIM7_IRQHandler
|
||||
TIM5_IRQHandler
|
||||
SPI3_IRQHandler
|
||||
DMA2_Channel1_IRQHandler
|
||||
DMA2_Channel2_IRQHandler
|
||||
DMA2_Channel3_IRQHandler
|
||||
DMA2_Channel4_IRQHandler
|
||||
DMA2_Channel5_IRQHandler
|
||||
AES_IRQHandler
|
||||
COMP_ACQ_IRQHandler
|
||||
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
END
|
||||
|
||||
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
||||
@@ -0,0 +1,419 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file startup_stm32l1xx_hd.s
|
||||
* @author MCD Application Team
|
||||
* @version V1.1.1
|
||||
* @date 09-March-2012
|
||||
* @brief STM32L1xx Ultra Low Power High-density Devices vector table for
|
||||
* RIDE7 toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
|
||||
.equ BootRAM, 0xF108F85F
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
movs r1, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r3, =_sidata
|
||||
ldr r3, [r3, r1]
|
||||
str r3, [r0, r1]
|
||||
adds r1, r1, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
ldr r0, =_sdata
|
||||
ldr r3, =_edata
|
||||
adds r2, r0, r1
|
||||
cmp r2, r3
|
||||
bcc CopyDataInit
|
||||
ldr r2, =_sbss
|
||||
b LoopFillZerobss
|
||||
/* Zero fill the bss segment. */
|
||||
FillZerobss:
|
||||
movs r3, #0
|
||||
str r3, [r2], #4
|
||||
|
||||
LoopFillZerobss:
|
||||
ldr r3, = _ebss
|
||||
cmp r2, r3
|
||||
bcc FillZerobss
|
||||
/* Call the clock system intitialization function.*/
|
||||
bl SystemInit
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
*
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/*******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_STAMP_IRQHandler
|
||||
.word RTC_WKUP_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_IRQHandler
|
||||
.word USB_HP_IRQHandler
|
||||
.word USB_LP_IRQHandler
|
||||
.word DAC_IRQHandler
|
||||
.word COMP_IRQHandler
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word LCD_IRQHandler
|
||||
.word TIM9_IRQHandler
|
||||
.word TIM10_IRQHandler
|
||||
.word TIM11_IRQHandler
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word TIM4_IRQHandler
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word I2C2_EV_IRQHandler
|
||||
.word I2C2_ER_IRQHandler
|
||||
.word SPI1_IRQHandler
|
||||
.word SPI2_IRQHandler
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word USART3_IRQHandler
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word USB_FS_WKUP_IRQHandler
|
||||
.word TIM6_IRQHandler
|
||||
.word TIM7_IRQHandler
|
||||
.word SDIO_IRQHandler
|
||||
.word TIM5_IRQHandler
|
||||
.word SPI3_IRQHandler
|
||||
.word UART4_IRQHandler
|
||||
.word UART5_IRQHandler
|
||||
.word DMA2_Channel1_IRQHandler
|
||||
.word DMA2_Channel2_IRQHandler
|
||||
.word DMA2_Channel3_IRQHandler
|
||||
.word DMA2_Channel4_IRQHandler
|
||||
.word DMA2_Channel5_IRQHandler
|
||||
.word AES_IRQHandler
|
||||
.word COMP_ACQ_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word BootRAM /* @0x108. This is for boot in RAM mode for
|
||||
STM32L15x ULtra Low Power High-density devices. */
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_STAMP_IRQHandler
|
||||
.thumb_set TAMPER_STAMP_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_WKUP_IRQHandler
|
||||
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_IRQHandler
|
||||
.thumb_set ADC1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_HP_IRQHandler
|
||||
.thumb_set USB_HP_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_LP_IRQHandler
|
||||
.thumb_set USB_LP_IRQHandler,Default_Handler
|
||||
|
||||
.weak DAC_IRQHandler
|
||||
.thumb_set DAC_IRQHandler,Default_Handler
|
||||
|
||||
.weak COMP_IRQHandler
|
||||
.thumb_set COMP_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak LCD_IRQHandler
|
||||
.thumb_set LCD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM9_IRQHandler
|
||||
.thumb_set TIM9_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM10_IRQHandler
|
||||
.thumb_set TIM10_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM11_IRQHandler
|
||||
.thumb_set TIM11_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_FS_WKUP_IRQHandler
|
||||
.thumb_set USB_FS_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM6_IRQHandler
|
||||
.thumb_set TIM6_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM7_IRQHandler
|
||||
.thumb_set TIM7_IRQHandler,Default_Handler
|
||||
|
||||
.weak SDIO_IRQHandler
|
||||
.thumb_set SDIO_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM5_IRQHandler
|
||||
.thumb_set TIM5_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI3_IRQHandler
|
||||
.thumb_set SPI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART4_IRQHandler
|
||||
.thumb_set UART4_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART5_IRQHandler
|
||||
.thumb_set UART5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel1_IRQHandler
|
||||
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel2_IRQHandler
|
||||
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel3_IRQHandler
|
||||
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel4_IRQHandler
|
||||
.thumb_set DMA2_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel5_IRQHandler
|
||||
.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak AES_IRQHandler
|
||||
.thumb_set AES_IRQHandler,Default_Handler
|
||||
|
||||
.weak COMP_ACQ_IRQHandler
|
||||
.thumb_set COMP_ACQ_IRQHandler,Default_Handler
|
||||
|
||||
/************************* (C) COPYRIGHT STMicroelectronics *****END OF FILE***/
|
||||
|
||||
@@ -0,0 +1,371 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file startup_stm32l1xx_md.s
|
||||
* @author MCD Application Team
|
||||
* @version V1.1.1
|
||||
* @date 09-March-2012
|
||||
* @brief STM32L1xx Ultra Low Power Medium-density Devices vector table for
|
||||
* RIDE7 toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
|
||||
.equ BootRAM, 0xF108F85F
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
movs r1, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r3, =_sidata
|
||||
ldr r3, [r3, r1]
|
||||
str r3, [r0, r1]
|
||||
adds r1, r1, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
ldr r0, =_sdata
|
||||
ldr r3, =_edata
|
||||
adds r2, r0, r1
|
||||
cmp r2, r3
|
||||
bcc CopyDataInit
|
||||
ldr r2, =_sbss
|
||||
b LoopFillZerobss
|
||||
/* Zero fill the bss segment. */
|
||||
FillZerobss:
|
||||
movs r3, #0
|
||||
str r3, [r2], #4
|
||||
|
||||
LoopFillZerobss:
|
||||
ldr r3, = _ebss
|
||||
cmp r2, r3
|
||||
bcc FillZerobss
|
||||
/* Call the clock system intitialization function.*/
|
||||
bl SystemInit
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
*
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/*******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_STAMP_IRQHandler
|
||||
.word RTC_WKUP_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_IRQHandler
|
||||
.word USB_HP_IRQHandler
|
||||
.word USB_LP_IRQHandler
|
||||
.word DAC_IRQHandler
|
||||
.word COMP_IRQHandler
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word LCD_IRQHandler
|
||||
.word TIM9_IRQHandler
|
||||
.word TIM10_IRQHandler
|
||||
.word TIM11_IRQHandler
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word TIM4_IRQHandler
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word I2C2_EV_IRQHandler
|
||||
.word I2C2_ER_IRQHandler
|
||||
.word SPI1_IRQHandler
|
||||
.word SPI2_IRQHandler
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word USART3_IRQHandler
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word USB_FS_WKUP_IRQHandler
|
||||
.word TIM6_IRQHandler
|
||||
.word TIM7_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word BootRAM /* @0x108. This is for boot in RAM mode for
|
||||
STM32L15x ULtra Low Power Medium-density devices. */
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_STAMP_IRQHandler
|
||||
.thumb_set TAMPER_STAMP_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_WKUP_IRQHandler
|
||||
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_IRQHandler
|
||||
.thumb_set ADC1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_HP_IRQHandler
|
||||
.thumb_set USB_HP_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_LP_IRQHandler
|
||||
.thumb_set USB_LP_IRQHandler,Default_Handler
|
||||
|
||||
.weak DAC_IRQHandler
|
||||
.thumb_set DAC_IRQHandler,Default_Handler
|
||||
|
||||
.weak COMP_IRQHandler
|
||||
.thumb_set COMP_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak LCD_IRQHandler
|
||||
.thumb_set LCD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM9_IRQHandler
|
||||
.thumb_set TIM9_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM10_IRQHandler
|
||||
.thumb_set TIM10_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM11_IRQHandler
|
||||
.thumb_set TIM11_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_FS_WKUP_IRQHandler
|
||||
.thumb_set USB_FS_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM6_IRQHandler
|
||||
.thumb_set TIM6_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM7_IRQHandler
|
||||
.thumb_set TIM7_IRQHandler,Default_Handler
|
||||
|
||||
/************************* (C) COPYRIGHT STMicroelectronics *****END OF FILE***/
|
||||
|
||||
@@ -0,0 +1,410 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file startup_stm32l1xx_mdp.s
|
||||
* @author MCD Application Team
|
||||
* @version V1.1.1
|
||||
* @date 09-March-2012
|
||||
* @brief STM32L1xx Ultra Low Power Medium-density Plus Devices vector table
|
||||
* for RIDE7 toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
|
||||
.equ BootRAM, 0xF108F85F
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
movs r1, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r3, =_sidata
|
||||
ldr r3, [r3, r1]
|
||||
str r3, [r0, r1]
|
||||
adds r1, r1, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
ldr r0, =_sdata
|
||||
ldr r3, =_edata
|
||||
adds r2, r0, r1
|
||||
cmp r2, r3
|
||||
bcc CopyDataInit
|
||||
ldr r2, =_sbss
|
||||
b LoopFillZerobss
|
||||
/* Zero fill the bss segment. */
|
||||
FillZerobss:
|
||||
movs r3, #0
|
||||
str r3, [r2], #4
|
||||
|
||||
LoopFillZerobss:
|
||||
ldr r3, = _ebss
|
||||
cmp r2, r3
|
||||
bcc FillZerobss
|
||||
/* Call the clock system intitialization function.*/
|
||||
bl SystemInit
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
*
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/*******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_STAMP_IRQHandler
|
||||
.word RTC_WKUP_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_IRQHandler
|
||||
.word USB_HP_IRQHandler
|
||||
.word USB_LP_IRQHandler
|
||||
.word DAC_IRQHandler
|
||||
.word COMP_IRQHandler
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word LCD_IRQHandler
|
||||
.word TIM9_IRQHandler
|
||||
.word TIM10_IRQHandler
|
||||
.word TIM11_IRQHandler
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word TIM4_IRQHandler
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word I2C2_EV_IRQHandler
|
||||
.word I2C2_ER_IRQHandler
|
||||
.word SPI1_IRQHandler
|
||||
.word SPI2_IRQHandler
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word USART3_IRQHandler
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word USB_FS_WKUP_IRQHandler
|
||||
.word TIM6_IRQHandler
|
||||
.word TIM7_IRQHandler
|
||||
.word 0
|
||||
.word TIM5_IRQHandler
|
||||
.word SPI3_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word DMA2_Channel1_IRQHandler
|
||||
.word DMA2_Channel2_IRQHandler
|
||||
.word DMA2_Channel3_IRQHandler
|
||||
.word DMA2_Channel4_IRQHandler
|
||||
.word DMA2_Channel5_IRQHandler
|
||||
.word AES_IRQHandler
|
||||
.word COMP_ACQ_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word BootRAM /* @0x108. This is for boot in RAM mode for
|
||||
STM32L15x ULtra Low Power Medium-density Plus devices. */
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_STAMP_IRQHandler
|
||||
.thumb_set TAMPER_STAMP_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_WKUP_IRQHandler
|
||||
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_IRQHandler
|
||||
.thumb_set ADC1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_HP_IRQHandler
|
||||
.thumb_set USB_HP_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_LP_IRQHandler
|
||||
.thumb_set USB_LP_IRQHandler,Default_Handler
|
||||
|
||||
.weak DAC_IRQHandler
|
||||
.thumb_set DAC_IRQHandler,Default_Handler
|
||||
|
||||
.weak COMP_IRQHandler
|
||||
.thumb_set COMP_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak LCD_IRQHandler
|
||||
.thumb_set LCD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM9_IRQHandler
|
||||
.thumb_set TIM9_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM10_IRQHandler
|
||||
.thumb_set TIM10_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM11_IRQHandler
|
||||
.thumb_set TIM11_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_FS_WKUP_IRQHandler
|
||||
.thumb_set USB_FS_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM6_IRQHandler
|
||||
.thumb_set TIM6_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM7_IRQHandler
|
||||
.thumb_set TIM7_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM5_IRQHandler
|
||||
.thumb_set TIM5_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI3_IRQHandler
|
||||
.thumb_set SPI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel1_IRQHandler
|
||||
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel2_IRQHandler
|
||||
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel3_IRQHandler
|
||||
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel4_IRQHandler
|
||||
.thumb_set DMA2_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel5_IRQHandler
|
||||
.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak AES_IRQHandler
|
||||
.thumb_set AES_IRQHandler,Default_Handler
|
||||
|
||||
.weak COMP_ACQ_IRQHandler
|
||||
.thumb_set COMP_ACQ_IRQHandler,Default_Handler
|
||||
|
||||
/************************* (C) COPYRIGHT STMicroelectronics *****END OF FILE***/
|
||||
|
||||
@@ -0,0 +1,544 @@
|
||||
;/******************** (C) COPYRIGHT 2012 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32l1xx_hd.s
|
||||
;* Author : MCD Application Team
|
||||
;* Version : V1.1.1
|
||||
;* Date : 09-March-2012
|
||||
;* Description : STM32L1xx Ultra Low Power High-density Devices vector
|
||||
;* table for EWARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == __iar_program_start,
|
||||
;* - Set the vector table entries with the exceptions ISR
|
||||
;* address.
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;********************************************************************************
|
||||
;*
|
||||
;* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
;* You may not use this file except in compliance with the License.
|
||||
;* You may obtain a copy of the License at:
|
||||
;*
|
||||
;* http://www.st.com/software_license_agreement_liberty_v2
|
||||
;*
|
||||
;* Unless required by applicable law or agreed to in writing, software
|
||||
;* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
;* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
;* See the License for the specific language governing permissions and
|
||||
;* limitations under the License.
|
||||
;*
|
||||
;*******************************************************************************/
|
||||
;
|
||||
;
|
||||
; The modules in this file are included in the libraries, and may be replaced
|
||||
; by any user-defined modules that define the PUBLIC symbol _program_start or
|
||||
; a user defined start symbol.
|
||||
; To override the cstartup defined in the library, simply add your modified
|
||||
; version to the workbench project.
|
||||
;
|
||||
; The vector table is normally located at address 0.
|
||||
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
|
||||
; The name "__vector_table" has special meaning for C-SPY:
|
||||
; it is where the SP start value is found, and the NVIC vector
|
||||
; table register (VTOR) is initialized to this address if != 0.
|
||||
;
|
||||
; Cortex-M version
|
||||
;
|
||||
|
||||
MODULE ?cstartup
|
||||
|
||||
;; Forward declaration of sections.
|
||||
SECTION CSTACK:DATA:NOROOT(3)
|
||||
|
||||
SECTION .intvec:CODE:NOROOT(2)
|
||||
|
||||
EXTERN __iar_program_start
|
||||
EXTERN SystemInit
|
||||
PUBLIC __vector_table
|
||||
|
||||
DATA
|
||||
__vector_table
|
||||
DCD sfe(CSTACK)
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_STAMP_IRQHandler ; Tamper and Time Stamp
|
||||
DCD RTC_WKUP_IRQHandler ; RTC Wakeup
|
||||
DCD FLASH_IRQHandler ; FLASH
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_IRQHandler ; ADC1
|
||||
DCD USB_HP_IRQHandler ; USB High Priority
|
||||
DCD USB_LP_IRQHandler ; USB Low Priority
|
||||
DCD DAC_IRQHandler ; DAC
|
||||
DCD COMP_IRQHandler ; COMP through EXTI Line
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD LCD_IRQHandler ; LCD
|
||||
DCD TIM9_IRQHandler ; TIM9
|
||||
DCD TIM10_IRQHandler ; TIM10
|
||||
DCD TIM11_IRQHandler ; TIM11
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
DCD USB_FS_WKUP_IRQHandler ; USB FS Wakeup from suspend
|
||||
DCD TIM6_IRQHandler ; TIM6
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD SDIO_IRQHandler ; SDIO
|
||||
DCD TIM5_IRQHandler ; TIM5
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD UART4_IRQHandler ; UART4
|
||||
DCD UART5_IRQHandler ; UART5
|
||||
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1
|
||||
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2
|
||||
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3
|
||||
DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4
|
||||
DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5
|
||||
DCD AES_IRQHandler ; AES
|
||||
DCD COMP_ACQ_IRQHandler ; Comparator Channel Acquisition
|
||||
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
;;
|
||||
;; Default interrupt handlers.
|
||||
;;
|
||||
THUMB
|
||||
|
||||
PUBWEAK Reset_Handler
|
||||
SECTION .text:CODE:REORDER(2)
|
||||
Reset_Handler
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__iar_program_start
|
||||
BX R0
|
||||
|
||||
PUBWEAK NMI_Handler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
NMI_Handler
|
||||
B NMI_Handler
|
||||
|
||||
|
||||
PUBWEAK HardFault_Handler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
HardFault_Handler
|
||||
B HardFault_Handler
|
||||
|
||||
|
||||
PUBWEAK MemManage_Handler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
MemManage_Handler
|
||||
B MemManage_Handler
|
||||
|
||||
|
||||
PUBWEAK BusFault_Handler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
BusFault_Handler
|
||||
B BusFault_Handler
|
||||
|
||||
|
||||
PUBWEAK UsageFault_Handler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
UsageFault_Handler
|
||||
B UsageFault_Handler
|
||||
|
||||
|
||||
PUBWEAK SVC_Handler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
SVC_Handler
|
||||
B SVC_Handler
|
||||
|
||||
|
||||
PUBWEAK DebugMon_Handler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
DebugMon_Handler
|
||||
B DebugMon_Handler
|
||||
|
||||
|
||||
PUBWEAK PendSV_Handler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
PendSV_Handler
|
||||
B PendSV_Handler
|
||||
|
||||
|
||||
PUBWEAK SysTick_Handler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
SysTick_Handler
|
||||
B SysTick_Handler
|
||||
|
||||
|
||||
PUBWEAK WWDG_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
WWDG_IRQHandler
|
||||
B WWDG_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK PVD_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
PVD_IRQHandler
|
||||
B PVD_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK TAMPER_STAMP_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
TAMPER_STAMP_IRQHandler
|
||||
B TAMPER_STAMP_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK RTC_WKUP_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
RTC_WKUP_IRQHandler
|
||||
B RTC_WKUP_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK FLASH_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
FLASH_IRQHandler
|
||||
B FLASH_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK RCC_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
RCC_IRQHandler
|
||||
B RCC_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK EXTI0_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
EXTI0_IRQHandler
|
||||
B EXTI0_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK EXTI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
EXTI1_IRQHandler
|
||||
B EXTI1_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK EXTI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
EXTI2_IRQHandler
|
||||
B EXTI2_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK EXTI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
EXTI3_IRQHandler
|
||||
B EXTI3_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK EXTI4_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
EXTI4_IRQHandler
|
||||
B EXTI4_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK DMA1_Channel1_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
DMA1_Channel1_IRQHandler
|
||||
B DMA1_Channel1_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK DMA1_Channel2_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
DMA1_Channel2_IRQHandler
|
||||
B DMA1_Channel2_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK DMA1_Channel3_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
DMA1_Channel3_IRQHandler
|
||||
B DMA1_Channel3_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK DMA1_Channel4_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
DMA1_Channel4_IRQHandler
|
||||
B DMA1_Channel4_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK DMA1_Channel5_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
DMA1_Channel5_IRQHandler
|
||||
B DMA1_Channel5_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK DMA1_Channel6_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
DMA1_Channel6_IRQHandler
|
||||
B DMA1_Channel6_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK DMA1_Channel7_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
DMA1_Channel7_IRQHandler
|
||||
B DMA1_Channel7_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK ADC1_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
ADC1_IRQHandler
|
||||
B ADC1_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK USB_HP_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
USB_HP_IRQHandler
|
||||
B USB_HP_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK USB_LP_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
USB_LP_IRQHandler
|
||||
B USB_LP_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK DAC_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
DAC_IRQHandler
|
||||
B DAC_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK COMP_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
COMP_IRQHandler
|
||||
B COMP_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK EXTI9_5_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
EXTI9_5_IRQHandler
|
||||
B EXTI9_5_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK LCD_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
LCD_IRQHandler
|
||||
B LCD_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK TIM9_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
TIM9_IRQHandler
|
||||
B TIM9_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK TIM10_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
TIM10_IRQHandler
|
||||
B TIM10_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK TIM11_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
TIM11_IRQHandler
|
||||
B TIM11_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK TIM2_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
TIM2_IRQHandler
|
||||
B TIM2_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK TIM3_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
TIM3_IRQHandler
|
||||
B TIM3_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK TIM4_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
TIM4_IRQHandler
|
||||
B TIM4_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK I2C1_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
I2C1_EV_IRQHandler
|
||||
B I2C1_EV_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK I2C1_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
I2C1_ER_IRQHandler
|
||||
B I2C1_ER_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK I2C2_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
I2C2_EV_IRQHandler
|
||||
B I2C2_EV_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK I2C2_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
I2C2_ER_IRQHandler
|
||||
B I2C2_ER_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK SPI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
SPI1_IRQHandler
|
||||
B SPI1_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK SPI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
SPI2_IRQHandler
|
||||
B SPI2_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK USART1_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
USART1_IRQHandler
|
||||
B USART1_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK USART2_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
USART2_IRQHandler
|
||||
B USART2_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK USART3_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
USART3_IRQHandler
|
||||
B USART3_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK EXTI15_10_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
EXTI15_10_IRQHandler
|
||||
B EXTI15_10_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK RTC_Alarm_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
RTC_Alarm_IRQHandler
|
||||
B RTC_Alarm_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK USB_FS_WKUP_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
USB_FS_WKUP_IRQHandler
|
||||
B USB_FS_WKUP_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK TIM6_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
TIM6_IRQHandler
|
||||
B TIM6_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK TIM7_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
TIM7_IRQHandler
|
||||
B TIM7_IRQHandler
|
||||
|
||||
PUBWEAK SDIO_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
SDIO_IRQHandler
|
||||
B SDIO_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK TIM5_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
TIM5_IRQHandler
|
||||
B TIM5_IRQHandler
|
||||
|
||||
PUBWEAK SPI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
SPI3_IRQHandler
|
||||
B SPI3_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK UART4_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
UART4_IRQHandler
|
||||
B UART4_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK UART5_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
UART5_IRQHandler
|
||||
B UART5_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel1_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
DMA2_Channel1_IRQHandler
|
||||
B DMA2_Channel1_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK DMA2_Channel2_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
DMA2_Channel2_IRQHandler
|
||||
B DMA2_Channel2_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK DMA2_Channel3_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
DMA2_Channel3_IRQHandler
|
||||
B DMA2_Channel3_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK DMA2_Channel4_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
DMA2_Channel4_IRQHandler
|
||||
B DMA2_Channel4_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK DMA2_Channel5_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
DMA2_Channel5_IRQHandler
|
||||
B DMA2_Channel5_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK AES_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
AES_IRQHandler
|
||||
B AES_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK COMP_ACQ_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
COMP_ACQ_IRQHandler
|
||||
B COMP_ACQ_IRQHandler
|
||||
|
||||
END
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,463 @@
|
||||
;/******************** (C) COPYRIGHT 2012 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32l1xx_md.s
|
||||
;* Author : MCD Application Team
|
||||
;* Version : V1.1.1
|
||||
;* Date : 09-March-2012
|
||||
;* Description : STM32L1xx Ultra Low Power Medium-density Devices vector
|
||||
;* table for EWARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == __iar_program_start,
|
||||
;* - Set the vector table entries with the exceptions ISR
|
||||
;* address.
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;********************************************************************************
|
||||
;*
|
||||
;* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
;* You may not use this file except in compliance with the License.
|
||||
;* You may obtain a copy of the License at:
|
||||
;*
|
||||
;* http://www.st.com/software_license_agreement_liberty_v2
|
||||
;*
|
||||
;* Unless required by applicable law or agreed to in writing, software
|
||||
;* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
;* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
;* See the License for the specific language governing permissions and
|
||||
;* limitations under the License.
|
||||
;*
|
||||
;*******************************************************************************/
|
||||
;
|
||||
;
|
||||
; The modules in this file are included in the libraries, and may be replaced
|
||||
; by any user-defined modules that define the PUBLIC symbol _program_start or
|
||||
; a user defined start symbol.
|
||||
; To override the cstartup defined in the library, simply add your modified
|
||||
; version to the workbench project.
|
||||
;
|
||||
; The vector table is normally located at address 0.
|
||||
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
|
||||
; The name "__vector_table" has special meaning for C-SPY:
|
||||
; it is where the SP start value is found, and the NVIC vector
|
||||
; table register (VTOR) is initialized to this address if != 0.
|
||||
;
|
||||
; Cortex-M version
|
||||
;
|
||||
|
||||
MODULE ?cstartup
|
||||
|
||||
;; Forward declaration of sections.
|
||||
SECTION CSTACK:DATA:NOROOT(3)
|
||||
|
||||
SECTION .intvec:CODE:NOROOT(2)
|
||||
|
||||
EXTERN __iar_program_start
|
||||
EXTERN SystemInit
|
||||
PUBLIC __vector_table
|
||||
|
||||
DATA
|
||||
__vector_table
|
||||
DCD sfe(CSTACK)
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_STAMP_IRQHandler ; Tamper and Time Stamp
|
||||
DCD RTC_WKUP_IRQHandler ; RTC Wakeup
|
||||
DCD FLASH_IRQHandler ; FLASH
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_IRQHandler ; ADC1
|
||||
DCD USB_HP_IRQHandler ; USB High Priority
|
||||
DCD USB_LP_IRQHandler ; USB Low Priority
|
||||
DCD DAC_IRQHandler ; DAC
|
||||
DCD COMP_IRQHandler ; COMP through EXTI Line
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD LCD_IRQHandler ; LCD
|
||||
DCD TIM9_IRQHandler ; TIM9
|
||||
DCD TIM10_IRQHandler ; TIM10
|
||||
DCD TIM11_IRQHandler ; TIM11
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
DCD USB_FS_WKUP_IRQHandler ; USB FS Wakeup from suspend
|
||||
DCD TIM6_IRQHandler ; TIM6
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
;;
|
||||
;; Default interrupt handlers.
|
||||
;;
|
||||
THUMB
|
||||
|
||||
PUBWEAK Reset_Handler
|
||||
SECTION .text:CODE:REORDER(2)
|
||||
Reset_Handler
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__iar_program_start
|
||||
BX R0
|
||||
|
||||
PUBWEAK NMI_Handler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
NMI_Handler
|
||||
B NMI_Handler
|
||||
|
||||
|
||||
PUBWEAK HardFault_Handler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
HardFault_Handler
|
||||
B HardFault_Handler
|
||||
|
||||
|
||||
PUBWEAK MemManage_Handler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
MemManage_Handler
|
||||
B MemManage_Handler
|
||||
|
||||
|
||||
PUBWEAK BusFault_Handler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
BusFault_Handler
|
||||
B BusFault_Handler
|
||||
|
||||
|
||||
PUBWEAK UsageFault_Handler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
UsageFault_Handler
|
||||
B UsageFault_Handler
|
||||
|
||||
|
||||
PUBWEAK SVC_Handler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
SVC_Handler
|
||||
B SVC_Handler
|
||||
|
||||
|
||||
PUBWEAK DebugMon_Handler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
DebugMon_Handler
|
||||
B DebugMon_Handler
|
||||
|
||||
|
||||
PUBWEAK PendSV_Handler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
PendSV_Handler
|
||||
B PendSV_Handler
|
||||
|
||||
|
||||
PUBWEAK SysTick_Handler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
SysTick_Handler
|
||||
B SysTick_Handler
|
||||
|
||||
|
||||
PUBWEAK WWDG_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
WWDG_IRQHandler
|
||||
B WWDG_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK PVD_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
PVD_IRQHandler
|
||||
B PVD_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK TAMPER_STAMP_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
TAMPER_STAMP_IRQHandler
|
||||
B TAMPER_STAMP_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK RTC_WKUP_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
RTC_WKUP_IRQHandler
|
||||
B RTC_WKUP_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK FLASH_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
FLASH_IRQHandler
|
||||
B FLASH_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK RCC_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
RCC_IRQHandler
|
||||
B RCC_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK EXTI0_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
EXTI0_IRQHandler
|
||||
B EXTI0_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK EXTI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
EXTI1_IRQHandler
|
||||
B EXTI1_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK EXTI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
EXTI2_IRQHandler
|
||||
B EXTI2_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK EXTI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
EXTI3_IRQHandler
|
||||
B EXTI3_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK EXTI4_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
EXTI4_IRQHandler
|
||||
B EXTI4_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK DMA1_Channel1_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
DMA1_Channel1_IRQHandler
|
||||
B DMA1_Channel1_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK DMA1_Channel2_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
DMA1_Channel2_IRQHandler
|
||||
B DMA1_Channel2_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK DMA1_Channel3_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
DMA1_Channel3_IRQHandler
|
||||
B DMA1_Channel3_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK DMA1_Channel4_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
DMA1_Channel4_IRQHandler
|
||||
B DMA1_Channel4_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK DMA1_Channel5_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
DMA1_Channel5_IRQHandler
|
||||
B DMA1_Channel5_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK DMA1_Channel6_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
DMA1_Channel6_IRQHandler
|
||||
B DMA1_Channel6_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK DMA1_Channel7_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
DMA1_Channel7_IRQHandler
|
||||
B DMA1_Channel7_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK ADC1_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
ADC1_IRQHandler
|
||||
B ADC1_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK USB_HP_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
USB_HP_IRQHandler
|
||||
B USB_HP_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK USB_LP_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
USB_LP_IRQHandler
|
||||
B USB_LP_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK DAC_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
DAC_IRQHandler
|
||||
B DAC_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK COMP_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
COMP_IRQHandler
|
||||
B COMP_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK EXTI9_5_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
EXTI9_5_IRQHandler
|
||||
B EXTI9_5_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK LCD_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
LCD_IRQHandler
|
||||
B LCD_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK TIM9_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
TIM9_IRQHandler
|
||||
B TIM9_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK TIM10_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
TIM10_IRQHandler
|
||||
B TIM10_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK TIM11_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
TIM11_IRQHandler
|
||||
B TIM11_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK TIM2_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
TIM2_IRQHandler
|
||||
B TIM2_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK TIM3_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
TIM3_IRQHandler
|
||||
B TIM3_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK TIM4_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
TIM4_IRQHandler
|
||||
B TIM4_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK I2C1_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
I2C1_EV_IRQHandler
|
||||
B I2C1_EV_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK I2C1_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
I2C1_ER_IRQHandler
|
||||
B I2C1_ER_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK I2C2_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
I2C2_EV_IRQHandler
|
||||
B I2C2_EV_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK I2C2_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
I2C2_ER_IRQHandler
|
||||
B I2C2_ER_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK SPI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
SPI1_IRQHandler
|
||||
B SPI1_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK SPI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
SPI2_IRQHandler
|
||||
B SPI2_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK USART1_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
USART1_IRQHandler
|
||||
B USART1_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK USART2_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
USART2_IRQHandler
|
||||
B USART2_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK USART3_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
USART3_IRQHandler
|
||||
B USART3_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK EXTI15_10_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
EXTI15_10_IRQHandler
|
||||
B EXTI15_10_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK RTC_Alarm_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
RTC_Alarm_IRQHandler
|
||||
B RTC_Alarm_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK USB_FS_WKUP_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
USB_FS_WKUP_IRQHandler
|
||||
B USB_FS_WKUP_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK TIM6_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
TIM6_IRQHandler
|
||||
B TIM6_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK TIM7_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
TIM7_IRQHandler
|
||||
B TIM7_IRQHandler
|
||||
|
||||
END
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,520 @@
|
||||
;/******************** (C) COPYRIGHT 2012 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32l1xx_mdp.s
|
||||
;* Author : MCD Application Team
|
||||
;* Version : V1.1.1
|
||||
;* Date : 09-March-2012
|
||||
;* Description : STM32L1xx Ultra Low Power Medium-density Plus Devices vector
|
||||
;* table for EWARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == __iar_program_start,
|
||||
;* - Set the vector table entries with the exceptions ISR
|
||||
;* address.
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;********************************************************************************
|
||||
;*
|
||||
;* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
;* You may not use this file except in compliance with the License.
|
||||
;* You may obtain a copy of the License at:
|
||||
;*
|
||||
;* http://www.st.com/software_license_agreement_liberty_v2
|
||||
;*
|
||||
;* Unless required by applicable law or agreed to in writing, software
|
||||
;* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
;* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
;* See the License for the specific language governing permissions and
|
||||
;* limitations under the License.
|
||||
;*
|
||||
;*******************************************************************************/
|
||||
;
|
||||
;
|
||||
; The modules in this file are included in the libraries, and may be replaced
|
||||
; by any user-defined modules that define the PUBLIC symbol _program_start or
|
||||
; a user defined start symbol.
|
||||
; To override the cstartup defined in the library, simply add your modified
|
||||
; version to the workbench project.
|
||||
;
|
||||
; The vector table is normally located at address 0.
|
||||
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
|
||||
; The name "__vector_table" has special meaning for C-SPY:
|
||||
; it is where the SP start value is found, and the NVIC vector
|
||||
; table register (VTOR) is initialized to this address if != 0.
|
||||
;
|
||||
; Cortex-M version
|
||||
;
|
||||
|
||||
MODULE ?cstartup
|
||||
|
||||
;; Forward declaration of sections.
|
||||
SECTION CSTACK:DATA:NOROOT(3)
|
||||
|
||||
SECTION .intvec:CODE:NOROOT(2)
|
||||
|
||||
EXTERN __iar_program_start
|
||||
EXTERN SystemInit
|
||||
PUBLIC __vector_table
|
||||
|
||||
DATA
|
||||
__vector_table
|
||||
DCD sfe(CSTACK)
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_STAMP_IRQHandler ; Tamper and Time Stamp
|
||||
DCD RTC_WKUP_IRQHandler ; RTC Wakeup
|
||||
DCD FLASH_IRQHandler ; FLASH
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_IRQHandler ; ADC1
|
||||
DCD USB_HP_IRQHandler ; USB High Priority
|
||||
DCD USB_LP_IRQHandler ; USB Low Priority
|
||||
DCD DAC_IRQHandler ; DAC
|
||||
DCD COMP_IRQHandler ; COMP through EXTI Line
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD LCD_IRQHandler ; LCD
|
||||
DCD TIM9_IRQHandler ; TIM9
|
||||
DCD TIM10_IRQHandler ; TIM10
|
||||
DCD TIM11_IRQHandler ; TIM11
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
DCD USB_FS_WKUP_IRQHandler ; USB FS Wakeup from suspend
|
||||
DCD TIM6_IRQHandler ; TIM6
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM5_IRQHandler ; TIM5
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1
|
||||
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2
|
||||
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3
|
||||
DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4
|
||||
DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5
|
||||
DCD AES_IRQHandler ; AES
|
||||
DCD COMP_ACQ_IRQHandler ; Comparator Channel Acquisition
|
||||
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
;;
|
||||
;; Default interrupt handlers.
|
||||
;;
|
||||
THUMB
|
||||
|
||||
PUBWEAK Reset_Handler
|
||||
SECTION .text:CODE:REORDER(2)
|
||||
Reset_Handler
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__iar_program_start
|
||||
BX R0
|
||||
|
||||
PUBWEAK NMI_Handler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
NMI_Handler
|
||||
B NMI_Handler
|
||||
|
||||
|
||||
PUBWEAK HardFault_Handler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
HardFault_Handler
|
||||
B HardFault_Handler
|
||||
|
||||
|
||||
PUBWEAK MemManage_Handler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
MemManage_Handler
|
||||
B MemManage_Handler
|
||||
|
||||
|
||||
PUBWEAK BusFault_Handler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
BusFault_Handler
|
||||
B BusFault_Handler
|
||||
|
||||
|
||||
PUBWEAK UsageFault_Handler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
UsageFault_Handler
|
||||
B UsageFault_Handler
|
||||
|
||||
|
||||
PUBWEAK SVC_Handler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
SVC_Handler
|
||||
B SVC_Handler
|
||||
|
||||
|
||||
PUBWEAK DebugMon_Handler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
DebugMon_Handler
|
||||
B DebugMon_Handler
|
||||
|
||||
|
||||
PUBWEAK PendSV_Handler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
PendSV_Handler
|
||||
B PendSV_Handler
|
||||
|
||||
|
||||
PUBWEAK SysTick_Handler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
SysTick_Handler
|
||||
B SysTick_Handler
|
||||
|
||||
|
||||
PUBWEAK WWDG_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
WWDG_IRQHandler
|
||||
B WWDG_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK PVD_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
PVD_IRQHandler
|
||||
B PVD_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK TAMPER_STAMP_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
TAMPER_STAMP_IRQHandler
|
||||
B TAMPER_STAMP_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK RTC_WKUP_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
RTC_WKUP_IRQHandler
|
||||
B RTC_WKUP_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK FLASH_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
FLASH_IRQHandler
|
||||
B FLASH_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK RCC_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
RCC_IRQHandler
|
||||
B RCC_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK EXTI0_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
EXTI0_IRQHandler
|
||||
B EXTI0_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK EXTI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
EXTI1_IRQHandler
|
||||
B EXTI1_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK EXTI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
EXTI2_IRQHandler
|
||||
B EXTI2_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK EXTI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
EXTI3_IRQHandler
|
||||
B EXTI3_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK EXTI4_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
EXTI4_IRQHandler
|
||||
B EXTI4_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK DMA1_Channel1_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
DMA1_Channel1_IRQHandler
|
||||
B DMA1_Channel1_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK DMA1_Channel2_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
DMA1_Channel2_IRQHandler
|
||||
B DMA1_Channel2_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK DMA1_Channel3_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
DMA1_Channel3_IRQHandler
|
||||
B DMA1_Channel3_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK DMA1_Channel4_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
DMA1_Channel4_IRQHandler
|
||||
B DMA1_Channel4_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK DMA1_Channel5_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
DMA1_Channel5_IRQHandler
|
||||
B DMA1_Channel5_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK DMA1_Channel6_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
DMA1_Channel6_IRQHandler
|
||||
B DMA1_Channel6_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK DMA1_Channel7_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
DMA1_Channel7_IRQHandler
|
||||
B DMA1_Channel7_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK ADC1_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
ADC1_IRQHandler
|
||||
B ADC1_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK USB_HP_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
USB_HP_IRQHandler
|
||||
B USB_HP_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK USB_LP_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
USB_LP_IRQHandler
|
||||
B USB_LP_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK DAC_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
DAC_IRQHandler
|
||||
B DAC_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK COMP_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
COMP_IRQHandler
|
||||
B COMP_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK EXTI9_5_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
EXTI9_5_IRQHandler
|
||||
B EXTI9_5_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK LCD_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
LCD_IRQHandler
|
||||
B LCD_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK TIM9_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
TIM9_IRQHandler
|
||||
B TIM9_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK TIM10_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
TIM10_IRQHandler
|
||||
B TIM10_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK TIM11_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
TIM11_IRQHandler
|
||||
B TIM11_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK TIM2_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
TIM2_IRQHandler
|
||||
B TIM2_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK TIM3_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
TIM3_IRQHandler
|
||||
B TIM3_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK TIM4_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
TIM4_IRQHandler
|
||||
B TIM4_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK I2C1_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
I2C1_EV_IRQHandler
|
||||
B I2C1_EV_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK I2C1_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
I2C1_ER_IRQHandler
|
||||
B I2C1_ER_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK I2C2_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
I2C2_EV_IRQHandler
|
||||
B I2C2_EV_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK I2C2_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
I2C2_ER_IRQHandler
|
||||
B I2C2_ER_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK SPI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
SPI1_IRQHandler
|
||||
B SPI1_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK SPI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
SPI2_IRQHandler
|
||||
B SPI2_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK USART1_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
USART1_IRQHandler
|
||||
B USART1_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK USART2_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
USART2_IRQHandler
|
||||
B USART2_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK USART3_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
USART3_IRQHandler
|
||||
B USART3_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK EXTI15_10_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
EXTI15_10_IRQHandler
|
||||
B EXTI15_10_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK RTC_Alarm_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
RTC_Alarm_IRQHandler
|
||||
B RTC_Alarm_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK USB_FS_WKUP_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
USB_FS_WKUP_IRQHandler
|
||||
B USB_FS_WKUP_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK TIM6_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
TIM6_IRQHandler
|
||||
B TIM6_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK TIM7_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
TIM7_IRQHandler
|
||||
B TIM7_IRQHandler
|
||||
|
||||
PUBWEAK TIM5_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
TIM5_IRQHandler
|
||||
B TIM5_IRQHandler
|
||||
|
||||
PUBWEAK SPI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
SPI3_IRQHandler
|
||||
B SPI3_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel1_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
DMA2_Channel1_IRQHandler
|
||||
B DMA2_Channel1_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel2_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
DMA2_Channel2_IRQHandler
|
||||
B DMA2_Channel2_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel3_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
DMA2_Channel3_IRQHandler
|
||||
B DMA2_Channel3_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel4_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
DMA2_Channel4_IRQHandler
|
||||
B DMA2_Channel4_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel5_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
DMA2_Channel5_IRQHandler
|
||||
B DMA2_Channel5_IRQHandler
|
||||
|
||||
PUBWEAK AES_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
AES_IRQHandler
|
||||
B AES_IRQHandler
|
||||
|
||||
PUBWEAK COMP_ACQ_IRQHandler
|
||||
SECTION .text:CODE:REORDER(1)
|
||||
COMP_ACQ_IRQHandler
|
||||
B COMP_ACQ_IRQHandler
|
||||
|
||||
END
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,533 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file system_stm32l1xx.c
|
||||
* @author MCD Application Team
|
||||
* @version V1.1.1
|
||||
* @date 09-March-2012
|
||||
* @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.
|
||||
* This file contains the system clock configuration for STM32L1xx Ultra
|
||||
* Low Power devices, and is generated by the clock configuration
|
||||
* tool "STM32L1xx_Clock_Configuration_V1.1.0.xls".
|
||||
*
|
||||
* 1. This file provides two functions and one global variable to be called from
|
||||
* user application:
|
||||
* - SystemInit(): Setups the system clock (System clock source, PLL Multiplier
|
||||
* and Divider factors, AHB/APBx prescalers and Flash settings),
|
||||
* depending on the configuration made in the clock xls tool.
|
||||
* This function is called at startup just after reset and
|
||||
* before branch to main program. This call is made inside
|
||||
* the "startup_stm32l1xx_xx.s" file.
|
||||
*
|
||||
* - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
|
||||
* by the user application to setup the SysTick
|
||||
* timer or configure other parameters.
|
||||
*
|
||||
* - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
|
||||
* be called whenever the core clock is changed
|
||||
* during program execution.
|
||||
*
|
||||
* 2. After each device reset the MSI (2.1 MHz Range) is used as system clock source.
|
||||
* Then SystemInit() function is called, in "startup_stm32l1xx_xx.s" file, to
|
||||
* configure the system clock before to branch to main program.
|
||||
*
|
||||
* 3. If the system clock source selected by user fails to startup, the SystemInit()
|
||||
* function will do nothing and MSI still used as system clock source. User can
|
||||
* add some code to deal with this issue inside the SetSysClock() function.
|
||||
*
|
||||
* 4. The default value of HSE crystal is set to 8MHz, refer to "HSE_VALUE" define
|
||||
* in "stm32l1xx.h" file. When HSE is used as system clock source, directly or
|
||||
* through PLL, and you are using different crystal you have to adapt the HSE
|
||||
* value to your own configuration.
|
||||
*
|
||||
* 5. This file configures the system clock as follows:
|
||||
*=============================================================================
|
||||
* System Clock Configuration
|
||||
*=============================================================================
|
||||
* System Clock source | PLL(HSE)
|
||||
*-----------------------------------------------------------------------------
|
||||
* SYSCLK | 32000000 Hz
|
||||
*-----------------------------------------------------------------------------
|
||||
* HCLK | 32000000 Hz
|
||||
*-----------------------------------------------------------------------------
|
||||
* AHB Prescaler | 1
|
||||
*-----------------------------------------------------------------------------
|
||||
* APB1 Prescaler | 1
|
||||
*-----------------------------------------------------------------------------
|
||||
* APB2 Prescaler | 1
|
||||
*-----------------------------------------------------------------------------
|
||||
* HSE Frequency | 8000000 Hz
|
||||
*-----------------------------------------------------------------------------
|
||||
* PLL DIV | 3
|
||||
*-----------------------------------------------------------------------------
|
||||
* PLL MUL | 12
|
||||
*-----------------------------------------------------------------------------
|
||||
* VDD | 3.3 V
|
||||
*-----------------------------------------------------------------------------
|
||||
* Vcore | 1.8 V (Range 1)
|
||||
*-----------------------------------------------------------------------------
|
||||
* Flash Latency | 1 WS
|
||||
*-----------------------------------------------------------------------------
|
||||
* SDIO clock (SDIOCLK) | 48000000 Hz
|
||||
*-----------------------------------------------------------------------------
|
||||
* Require 48MHz for USB clock | Disabled
|
||||
*-----------------------------------------------------------------------------
|
||||
*=============================================================================
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/** @addtogroup CMSIS
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup stm32l1xx_system
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32L1xx_System_Private_Includes
|
||||
* @{
|
||||
*/
|
||||
|
||||
#include "stm32l1xx.h"
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32L1xx_System_Private_TypesDefinitions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32L1xx_System_Private_Defines
|
||||
* @{
|
||||
*/
|
||||
|
||||
/*!< Uncomment the following line if you need to use external SRAM mounted
|
||||
on STM32L152D_EVAL board as data memory */
|
||||
/* #define DATA_IN_ExtSRAM */
|
||||
|
||||
/*!< Uncomment the following line if you need to relocate your vector Table in
|
||||
Internal SRAM. */
|
||||
/* #define VECT_TAB_SRAM */
|
||||
#define VECT_TAB_OFFSET 0x0 /*!< Vector Table base offset field.
|
||||
This value must be a multiple of 0x200. */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32L1xx_System_Private_Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32L1xx_System_Private_Variables
|
||||
* @{
|
||||
*/
|
||||
uint32_t SystemCoreClock = 32000000;
|
||||
__I uint8_t PLLMulTable[9] = {3, 4, 6, 8, 12, 16, 24, 32, 48};
|
||||
__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32L1xx_System_Private_FunctionPrototypes
|
||||
* @{
|
||||
*/
|
||||
|
||||
static void SetSysClock(void);
|
||||
#ifdef DATA_IN_ExtSRAM
|
||||
static void SystemInit_ExtMemCtl(void);
|
||||
#endif /* DATA_IN_ExtSRAM */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32L1xx_System_Private_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Setup the microcontroller system.
|
||||
* Initialize the Embedded Flash Interface, the PLL and update the
|
||||
* SystemCoreClock variable.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemInit (void)
|
||||
{
|
||||
/*!< Set MSION bit */
|
||||
RCC->CR |= (uint32_t)0x00000100;
|
||||
|
||||
/*!< Reset SW[1:0], HPRE[3:0], PPRE1[2:0], PPRE2[2:0], MCOSEL[2:0] and MCOPRE[2:0] bits */
|
||||
RCC->CFGR &= (uint32_t)0x88FFC00C;
|
||||
|
||||
/*!< Reset HSION, HSEON, CSSON and PLLON bits */
|
||||
RCC->CR &= (uint32_t)0xEEFEFFFE;
|
||||
|
||||
/*!< Reset HSEBYP bit */
|
||||
RCC->CR &= (uint32_t)0xFFFBFFFF;
|
||||
|
||||
/*!< Reset PLLSRC, PLLMUL[3:0] and PLLDIV[1:0] bits */
|
||||
RCC->CFGR &= (uint32_t)0xFF02FFFF;
|
||||
|
||||
/*!< Disable all interrupts */
|
||||
RCC->CIR = 0x00000000;
|
||||
|
||||
#ifdef DATA_IN_ExtSRAM
|
||||
SystemInit_ExtMemCtl();
|
||||
#endif /* DATA_IN_ExtSRAM */
|
||||
|
||||
/* Configure the System clock frequency, AHB/APBx prescalers and Flash settings */
|
||||
SetSysClock();
|
||||
|
||||
#ifdef VECT_TAB_SRAM
|
||||
SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
|
||||
#else
|
||||
SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */
|
||||
#endif
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Update SystemCoreClock according to Clock Register Values
|
||||
* The SystemCoreClock variable contains the core clock (HCLK), it can
|
||||
* be used by the user application to setup the SysTick timer or configure
|
||||
* other parameters.
|
||||
*
|
||||
* @note Each time the core clock (HCLK) changes, this function must be called
|
||||
* to update SystemCoreClock variable value. Otherwise, any configuration
|
||||
* based on this variable will be incorrect.
|
||||
*
|
||||
* @note - The system frequency computed by this function is not the real
|
||||
* frequency in the chip. It is calculated based on the predefined
|
||||
* constant and the selected clock source:
|
||||
*
|
||||
* - If SYSCLK source is MSI, SystemCoreClock will contain the MSI
|
||||
* value as defined by the MSI range.
|
||||
*
|
||||
* - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
|
||||
*
|
||||
* - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
|
||||
*
|
||||
* - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
|
||||
* or HSI_VALUE(*) multiplied/divided by the PLL factors.
|
||||
*
|
||||
* (*) HSI_VALUE is a constant defined in stm32l1xx.h file (default value
|
||||
* 16 MHz) but the real value may vary depending on the variations
|
||||
* in voltage and temperature.
|
||||
*
|
||||
* (**) HSE_VALUE is a constant defined in stm32l1xx.h file (default value
|
||||
* 8 MHz), user has to ensure that HSE_VALUE is same as the real
|
||||
* frequency of the crystal used. Otherwise, this function may
|
||||
* have wrong result.
|
||||
*
|
||||
* - The result of this function could be not correct when using fractional
|
||||
* value for HSE crystal.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemCoreClockUpdate (void)
|
||||
{
|
||||
uint32_t tmp = 0, pllmul = 0, plldiv = 0, pllsource = 0, msirange = 0;
|
||||
|
||||
/* Get SYSCLK source -------------------------------------------------------*/
|
||||
tmp = RCC->CFGR & RCC_CFGR_SWS;
|
||||
|
||||
switch (tmp)
|
||||
{
|
||||
case 0x00: /* MSI used as system clock */
|
||||
msirange = (RCC->ICSCR & RCC_ICSCR_MSIRANGE) >> 13;
|
||||
SystemCoreClock = (32768 * (1 << (msirange + 1)));
|
||||
break;
|
||||
case 0x04: /* HSI used as system clock */
|
||||
SystemCoreClock = HSI_VALUE;
|
||||
break;
|
||||
case 0x08: /* HSE used as system clock */
|
||||
SystemCoreClock = HSE_VALUE;
|
||||
break;
|
||||
case 0x0C: /* PLL used as system clock */
|
||||
/* Get PLL clock source and multiplication factor ----------------------*/
|
||||
pllmul = RCC->CFGR & RCC_CFGR_PLLMUL;
|
||||
plldiv = RCC->CFGR & RCC_CFGR_PLLDIV;
|
||||
pllmul = PLLMulTable[(pllmul >> 18)];
|
||||
plldiv = (plldiv >> 22) + 1;
|
||||
|
||||
pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
|
||||
|
||||
if (pllsource == 0x00)
|
||||
{
|
||||
/* HSI oscillator clock selected as PLL clock entry */
|
||||
SystemCoreClock = (((HSI_VALUE) * pllmul) / plldiv);
|
||||
}
|
||||
else
|
||||
{
|
||||
/* HSE selected as PLL clock entry */
|
||||
SystemCoreClock = (((HSE_VALUE) * pllmul) / plldiv);
|
||||
}
|
||||
break;
|
||||
default: /* MSI used as system clock */
|
||||
msirange = (RCC->ICSCR & RCC_ICSCR_MSIRANGE) >> 13;
|
||||
SystemCoreClock = (32768 * (1 << (msirange + 1)));
|
||||
break;
|
||||
}
|
||||
/* Compute HCLK clock frequency --------------------------------------------*/
|
||||
/* Get HCLK prescaler */
|
||||
tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
|
||||
/* HCLK clock frequency */
|
||||
SystemCoreClock >>= tmp;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Configures the System clock frequency, AHB/APBx prescalers and Flash
|
||||
* settings.
|
||||
* @note This function should be called only once the RCC clock configuration
|
||||
* is reset to the default reset state (done in SystemInit() function).
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void SetSysClock(void)
|
||||
{
|
||||
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
||||
|
||||
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
|
||||
/* Enable HSE */
|
||||
RCC->CR |= ((uint32_t)RCC_CR_HSEON);
|
||||
|
||||
/* Wait till HSE is ready and if Time out is reached exit */
|
||||
do
|
||||
{
|
||||
HSEStatus = RCC->CR & RCC_CR_HSERDY;
|
||||
StartUpCounter++;
|
||||
} while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
||||
|
||||
if ((RCC->CR & RCC_CR_HSERDY) != RESET)
|
||||
{
|
||||
HSEStatus = (uint32_t)0x01;
|
||||
}
|
||||
else
|
||||
{
|
||||
HSEStatus = (uint32_t)0x00;
|
||||
}
|
||||
|
||||
if (HSEStatus == (uint32_t)0x01)
|
||||
{
|
||||
/* Enable 64-bit access */
|
||||
FLASH->ACR |= FLASH_ACR_ACC64;
|
||||
|
||||
/* Enable Prefetch Buffer */
|
||||
FLASH->ACR |= FLASH_ACR_PRFTEN;
|
||||
|
||||
/* Flash 1 wait state */
|
||||
FLASH->ACR |= FLASH_ACR_LATENCY;
|
||||
|
||||
/* Power enable */
|
||||
RCC->APB1ENR |= RCC_APB1ENR_PWREN;
|
||||
|
||||
/* Select the Voltage Range 1 (1.8 V) */
|
||||
PWR->CR = PWR_CR_VOS_0;
|
||||
|
||||
/* Wait Until the Voltage Regulator is ready */
|
||||
while((PWR->CSR & PWR_CSR_VOSF) != RESET)
|
||||
{
|
||||
}
|
||||
|
||||
/* HCLK = SYSCLK /1*/
|
||||
RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
|
||||
|
||||
/* PCLK2 = HCLK /1*/
|
||||
RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
|
||||
|
||||
/* PCLK1 = HCLK /1*/
|
||||
RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
|
||||
|
||||
/* PLL configuration */
|
||||
RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLMUL |
|
||||
RCC_CFGR_PLLDIV));
|
||||
RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMUL12 | RCC_CFGR_PLLDIV3);
|
||||
|
||||
/* Enable PLL */
|
||||
RCC->CR |= RCC_CR_PLLON;
|
||||
|
||||
/* Wait till PLL is ready */
|
||||
while((RCC->CR & RCC_CR_PLLRDY) == 0)
|
||||
{
|
||||
}
|
||||
|
||||
/* Select PLL as system clock source */
|
||||
RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
|
||||
RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;
|
||||
|
||||
/* Wait till PLL is used as system clock source */
|
||||
while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)RCC_CFGR_SWS_PLL)
|
||||
{
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
/* If HSE fails to start-up, the application will have wrong clock
|
||||
configuration. User can add here some code to deal with this error */
|
||||
}
|
||||
}
|
||||
|
||||
#ifdef DATA_IN_ExtSRAM
|
||||
/**
|
||||
* @brief Setup the external memory controller.
|
||||
* Called in SystemInit() function before jump to main.
|
||||
* This function configures the external SRAM mounted on STM32L152D_EVAL board
|
||||
* This SRAM will be used as program data memory (including heap and stack).
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemInit_ExtMemCtl(void)
|
||||
{
|
||||
/*-- GPIOs Configuration -----------------------------------------------------*/
|
||||
/*
|
||||
+-------------------+--------------------+------------------+------------------+
|
||||
+ SRAM pins assignment +
|
||||
+-------------------+--------------------+------------------+------------------+
|
||||
| PD0 <-> FSMC_D2 | PE0 <-> FSMC_NBL0 | PF0 <-> FSMC_A0 | PG0 <-> FSMC_A10 |
|
||||
| PD1 <-> FSMC_D3 | PE1 <-> FSMC_NBL1 | PF1 <-> FSMC_A1 | PG1 <-> FSMC_A11 |
|
||||
| PD4 <-> FSMC_NOE | PE7 <-> FSMC_D4 | PF2 <-> FSMC_A2 | PG2 <-> FSMC_A12 |
|
||||
| PD5 <-> FSMC_NWE | PE8 <-> FSMC_D5 | PF3 <-> FSMC_A3 | PG3 <-> FSMC_A13 |
|
||||
| PD8 <-> FSMC_D13 | PE9 <-> FSMC_D6 | PF4 <-> FSMC_A4 | PG4 <-> FSMC_A14 |
|
||||
| PD9 <-> FSMC_D14 | PE10 <-> FSMC_D7 | PF5 <-> FSMC_A5 | PG5 <-> FSMC_A15 |
|
||||
| PD10 <-> FSMC_D15 | PE11 <-> FSMC_D8 | PF12 <-> FSMC_A6 | PG10<-> FSMC_NE2 |
|
||||
| PD11 <-> FSMC_A16 | PE12 <-> FSMC_D9 | PF13 <-> FSMC_A7 |------------------+
|
||||
| PD12 <-> FSMC_A17 | PE13 <-> FSMC_D10 | PF14 <-> FSMC_A8 |
|
||||
| PD13 <-> FSMC_A18 | PE14 <-> FSMC_D11 | PF15 <-> FSMC_A9 |
|
||||
| PD14 <-> FSMC_D0 | PE15 <-> FSMC_D12 |------------------+
|
||||
| PD15 <-> FSMC_D1 |--------------------+
|
||||
+-------------------+
|
||||
*/
|
||||
|
||||
/* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
|
||||
RCC->AHBENR = 0x000080D8;
|
||||
|
||||
/* Connect PDx pins to FSMC Alternate function */
|
||||
GPIOD->AFR[0] = 0x00CC00CC;
|
||||
GPIOD->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PDx pins in Alternate function mode */
|
||||
GPIOD->MODER = 0xAAAA0A0A;
|
||||
/* Configure PDx pins speed to 40 MHz */
|
||||
GPIOD->OSPEEDR = 0xFFFF0F0F;
|
||||
/* Configure PDx pins Output type to push-pull */
|
||||
GPIOD->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PDx pins */
|
||||
GPIOD->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PEx pins to FSMC Alternate function */
|
||||
GPIOE->AFR[0] = 0xC00000CC;
|
||||
GPIOE->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PEx pins in Alternate function mode */
|
||||
GPIOE->MODER = 0xAAAA800A;
|
||||
/* Configure PEx pins speed to 40 MHz */
|
||||
GPIOE->OSPEEDR = 0xFFFFC00F;
|
||||
/* Configure PEx pins Output type to push-pull */
|
||||
GPIOE->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PEx pins */
|
||||
GPIOE->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PFx pins to FSMC Alternate function */
|
||||
GPIOF->AFR[0] = 0x00CCCCCC;
|
||||
GPIOF->AFR[1] = 0xCCCC0000;
|
||||
/* Configure PFx pins in Alternate function mode */
|
||||
GPIOF->MODER = 0xAA000AAA;
|
||||
/* Configure PFx pins speed to 40 MHz */
|
||||
GPIOF->OSPEEDR = 0xFF000FFF;
|
||||
/* Configure PFx pins Output type to push-pull */
|
||||
GPIOF->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PFx pins */
|
||||
GPIOF->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PGx pins to FSMC Alternate function */
|
||||
GPIOG->AFR[0] = 0x00CCCCCC;
|
||||
GPIOG->AFR[1] = 0x00000C00;
|
||||
/* Configure PGx pins in Alternate function mode */
|
||||
GPIOG->MODER = 0x00200AAA;
|
||||
/* Configure PGx pins speed to 40 MHz */
|
||||
GPIOG->OSPEEDR = 0x00300FFF;
|
||||
/* Configure PGx pins Output type to push-pull */
|
||||
GPIOG->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PGx pins */
|
||||
GPIOG->PUPDR = 0x00000000;
|
||||
|
||||
/*-- FSMC Configuration ------------------------------------------------------*/
|
||||
/* Enable the FSMC interface clock */
|
||||
RCC->AHBENR = 0x400080D8;
|
||||
|
||||
/* Configure and enable Bank1_SRAM3 */
|
||||
FSMC_Bank1->BTCR[4] = 0x00001011;
|
||||
FSMC_Bank1->BTCR[5] = 0x00000300;
|
||||
FSMC_Bank1E->BWTR[4] = 0x0FFFFFFF;
|
||||
/*
|
||||
Bank1_SRAM3 is configured as follow:
|
||||
|
||||
p.FSMC_AddressSetupTime = 0;
|
||||
p.FSMC_AddressHoldTime = 0;
|
||||
p.FSMC_DataSetupTime = 3;
|
||||
p.FSMC_BusTurnAroundDuration = 0;
|
||||
p.FSMC_CLKDivision = 0;
|
||||
p.FSMC_DataLatency = 0;
|
||||
p.FSMC_AccessMode = FSMC_AccessMode_A;
|
||||
|
||||
FSMC_NORSRAMInitStructure.FSMC_Bank = FSMC_Bank1_NORSRAM3;
|
||||
FSMC_NORSRAMInitStructure.FSMC_DataAddressMux = FSMC_DataAddressMux_Disable;
|
||||
FSMC_NORSRAMInitStructure.FSMC_MemoryType = FSMC_MemoryType_SRAM;
|
||||
FSMC_NORSRAMInitStructure.FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_16b;
|
||||
FSMC_NORSRAMInitStructure.FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable;
|
||||
FSMC_NORSRAMInitStructure.FSMC_AsynchronousWait = FSMC_AsynchronousWait_Disable;
|
||||
FSMC_NORSRAMInitStructure.FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low;
|
||||
FSMC_NORSRAMInitStructure.FSMC_WrapMode = FSMC_WrapMode_Disable;
|
||||
FSMC_NORSRAMInitStructure.FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState;
|
||||
FSMC_NORSRAMInitStructure.FSMC_WriteOperation = FSMC_WriteOperation_Enable;
|
||||
FSMC_NORSRAMInitStructure.FSMC_WaitSignal = FSMC_WaitSignal_Disable;
|
||||
FSMC_NORSRAMInitStructure.FSMC_ExtendedMode = FSMC_ExtendedMode_Disable;
|
||||
FSMC_NORSRAMInitStructure.FSMC_WriteBurst = FSMC_WriteBurst_Disable;
|
||||
FSMC_NORSRAMInitStructure.FSMC_ReadWriteTimingStruct = &p;
|
||||
FSMC_NORSRAMInitStructure.FSMC_WriteTimingStruct = &p;
|
||||
|
||||
FSMC_NORSRAMInit(&FSMC_NORSRAMInitStructure);
|
||||
|
||||
FSMC_NORSRAMCmd(FSMC_Bank1_NORSRAM3, ENABLE);
|
||||
*/
|
||||
|
||||
}
|
||||
#endif /* DATA_IN_ExtSRAM */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
Reference in New Issue
Block a user